Volume up
Set your phone volume to 100% and disconnect headphones or Bluetooth speakers.
Eject water 💦 and dust from the speakers of your phone, tablet or gadget
Tap the button to start the cleaning sound.
🔊 Turn your volume all the way up first
Set your phone volume to 100% and disconnect headphones or Bluetooth speakers.
Tap the button – a low-frequency sound wave shakes water and dust out of the speaker mesh.
Point the speaker down, wipe your phone dry, and repeat 2–3 times until the sound is clear again.
Fix My Speaker is a free speaker cleaner that runs right in your browser. When your phone takes a dip in a pool, sink or puddle – or the speaker mesh clogs up with pocket dust – the sound turns quiet and muffled. This tool brings it back in a couple of minutes.
Tap the play button and the page emits a 165 Hz cleaning tone. The low-frequency vibration makes the speaker membrane push water droplets and loose dust out through the mesh. Apple builds the same principle into the Water Lock feature of the Apple Watch, which ejects water from the speaker after swimming.
There is nothing to download or sign up for: the cleaning sound plays straight from the page on any gadget with a speaker – iPhone, Android, Samsung, tablets and laptops alike.
The two usual causes are water trapped behind the speaker mesh – after rain, a shower or a pool – and a build-up of dust or pocket lint. Both stop the membrane from moving freely, so calls and music come out quiet and distorted.
Yes. 165 Hz sits comfortably within the range every phone speaker is built to reproduce, and each playback lasts only a few seconds. Apple relies on the same sound-based approach in the Water Lock feature of the Apple Watch.
Two or three rounds are usually enough. Hold the device with the speaker facing down, play the tone at full volume, wipe away the droplets that appear, and repeat until the audio sounds clear.
It works on any device that has a speaker and a web browser: iPhone and Android phones, Samsung and Xiaomi models, tablets, laptops, even smartwatches. Nothing to install – the tone plays straight from this page.
Give the device a few hours to dry with the speaker facing down, then run the tone again. If the sound has not recovered after 24 hours, moisture may have reached deeper components – have a repair shop take a look.